X
Visit Full Site

How To Renew Your Deck In 5 Easy Steps

Summer is here, which means you need to take a hard look at your deck. Given winter’s inclement conditions, there’s a good chance your deck is in need of some attention. Here are some quick and easy steps for getting it in shape:

#1 Clean your deck.

Regular cleaning prevents your deck from graying and looking worn down. You can employ a few different methods to keep it spotless:

#2 Check for repairs.

Once the deck is clean, you can inspect for any potential damage points. Keep an eye out for:

You can DIY most of these problems, but if you have termites infesting your deck, think about hiring a pest control service. Otherwise, consider replacing boards or restaining the surface.

#3 Sand it down.

If your stain is stripped away, consider sanding the surface. If you don’t want to spend all day sanding, you can rent a floor sander. After you’ve sanded your decking smooth, apply a finish.

#4 Stain or seal your deck.

Once you’ve sanded down the surface, think about sealing or staining. Finishes help protect against water damage, mildew and inclement weather. Here are some considerations when determining whether to seal or stain a deck:

#5 Consider a brightener.

Use a brightener if your deck has stains or grey spots. You can apply brightener using a garden spray hose. A fresh coat of brightener will renew the appearance of your deck without expensive and time-consuming repairs.

Conclusion

Make sure to keep your deck in shape with regular maintenance and cleaning. Most of these jobs you can do as DIY projects. But don’t be afraid to call a deck professional when the situation is beyond your expertise.

 

Written by Andrea Davis for Realty Times Staff for www.RealtyTimes.com Copyright © 2016 Realty Times All Rights Reserved. Andrea Davis is the editor for Home Advisor, which helps homeowners find home improvement professionals in their area at no charge to ensure the best service in the shortest amount of time.

This post was last modified on 10/18/2016 10:05 am